
M8000 8,000 lb. Winch
THIS PAGE COVERS P/N 20910
(Click here if your winch P/N is 26502 or 88502)
Serial numbers 153525 to 194630
(click here for serial numbers 195599 to 211769)
(click here for serial numbers 212057 to 348579)
(click here for serial numbers 348580 to 623335)
(click here for serial numbers 623336 and
up)
P/N 20910
Serial numbers 153525 to 194630
Click on the item number of the part you need to replace 
Wireless Remote Receiver Module P/N 77825
Transmitter P/N 74520
*Items 9, 29, 30 and 43 are replaced by the RETRO
FIT DIRECT DRIVE BRAKE ASSY, P/N 27131
M8000 Winch
P/N 20910
Serial numbers 195599 to 211769
Click on the item number of the part you need to replace
Wireless Remote Receiver Module P/N 77825
Transmitter P/N 74520
M8000 Winch
P/N 20910
Serial numbers 212057 to 348579
Click on the item number of the part you need to replace
Wireless Remote Receiver Module P/N 77825
Transmitter P/N 74520
M8000 Winch
P/N 20910
serial
numbers 348580 to 623335
Click on the item number of the part you need to replace

Wireless Remote Receiver Module P/N 77825
Transmitter P/N 74520
M8000 Winch
P/N 39116
Serial numbers 623336 and up
Click on the item number of the part you need to replace
Wireless Remote Receiver Module P/N 77825
Transmitter P/N 74520
WARN WINCH REMOTE CONTROL
INTUITIVE FEATURES IN THE PALM OF YOUR HAND |
Welcome to the next generation of winch remote controls. The new WARN remote incorporates an improved ergonomic design and intuitive features that help operators better navigate through winching operations.
WARN S2 (Smart Sense) elements, such as an instinctive rocker switch with an elevated dimple on Power-Out and a recessed dimple on Power-In, and a high-impact polymer grip allow operators to pay more attention to the winching situation rather than the remote. By using the sense of feel, rather than sight, operators can confirm the winch line's direction without relying on the visual cues on the remote handle.
An increased control surface area on the remote allows for easy use while wearing gloves.
|
*WARN WIRELESS CONTROL SYSTEM
CONTROL YOUR WINCH WITH NO STRINGS (OR WIRES) ATTACHED. |
The WARN Wireless Control System lets you
operate your truck's winch remotely from
up to 50' away. The system will work with
any WARN winch with a 5-wire electrical
system.
The system is easy to install and a cinch to use. For
easy installation, the Wireless Control System comes
with a receiver with an internal antenna, and all of the
necessary mounting hardware. The receiver is potted for
extreme resistance to water and the elements. The
weather-proof transmitter has two large buttons that make it
easy to operate, even while wearing gloves, and its two-color LED provides operator feedback.
When installed, the system is simple to operate. To begin activation, hold down both buttons on the transmitter for five seconds until the two-color LED turns green. This indicates the system has been activated. To begin the winching process, hold down the power-in or power-out buttons, and the LED will turn red, showing that winching is in process. The LED will blink if the transmitter's battery is low. System automatically turns off to conserve battery life.
With the WARN Wireless Control System, you can now operate your winch with no strings (or wires) attached.
PN 90287 Wireless Control System for WARN Truck/SUV winches
Wireless Remote Receiver Module P/N 77825 |
|