M12000 12,000 lb. Winch
THIS PAGE COVERS P/N 17801
Oil bath lubricated model:
All serial numbers
Grease lubed models, serial numbers
up to 41371
Grease lubed models, serial numbers
41642 to 64243
Grease lubed models, serial numbers
64244 to 72929
Grease lubed models, serial numbers
72930 to 78560
Grease lubed models, serial numbers
78561 to 80278
Grease lubed models, serial numbers 80279 to 636696
Grease lubed models, serial numbers 636697 and up
P/N 17801
Oil Bath Lubricated Model
All serial numbers
Click on the item number of the part you need to replace
Wireless Remote Receiver Module P/N 77825
Transmitter P/N 74520
M12000
12,000 lb. Winch
P/N 17801
Serial numbers up to 41371
Click on the item number of the part you need to replace
Wireless Remote Receiver Module P/N 77825
Transmitter P/N 74520
M12000
12,000 lb. Winch
P/N 17801
Serial numbers 40642 to 64243
Click on the item number of the part you need to replace
Wireless Remote Receiver Module P/N 77825
Transmitter P/N 74520
M12000
12,000 lb. Winch
P/N 17801
serial
numbers 64244 to 72929
Click on the item number of the part you need to replace
Wireless Remote Receiver Module P/N 77825
Transmitter P/N 74520
*WARN WIRELESS CONTROL SYSTEM
CONTROL YOUR WINCH WITH NO STRINGS (OR WIRES) ATTACHED. |
 The WARN Wireless Control System lets you
operate your truck's winch remotely from
up to 50' away. The system will work with
any WARN winch with a 5-wire electrical
system.
The system is easy to install and a cinch to use. For
easy installation, the Wireless Control System comes
with a receiver with an internal antenna, and all of the
necessary mounting hardware. The receiver is potted for
extreme resistance to water and the elements. The
weather-proof transmitter has two large buttons that make it
easy to operate, even while wearing gloves, and its two-color LED provides operator feedback.
When installed, the system is simple to operate. To begin activation, hold down both buttons on the transmitter for five seconds until the two-color LED turns green. This indicates the system has been activated. To begin the winching process, hold down the power-in or power-out buttons, and the LED will turn red, showing that winching is in process. The LED will blink if the transmitter's battery is low. System automatically turns off to conserve battery life.
With the WARN Wireless Control System, you can now operate your winch with no strings (or wires) attached.
PN 90287 Wireless Control System for WARN Truck/SUV winches
Wireless Remote Receiver Module P/N 77825 |
|
